Overview

Ronseal One Coat Wood Primer & Undercoat is a water based primer that can be used on bare or previously painted wood surfaces. It’s formulated to offer excellent adhesion and good opacity to cover over bold and strong colours. It’s flexible so won’t crack or peel and will keep your woodwork looking its best for longer.

• Excellent adheshion
• Covers bold colours
• Paintable in 2 hours
• Use on bare or previously painted wood

Preparation

Always ensure the surface to be treated is clean, dry and free from any dust, algae, fungi or moss.

• Lightly sand with a 120 grit sandpaper, working in the direction of the grain.
• If your paintwork is in bad condition and is cracked or peeling sand back to the bare wood to provide a smooth surface.
• Wipe with white spirit and a cloth to clean grease, dirt and dust.
• If there are any cracks or holes fill them with appropriate wood filler.

Application

Before application, stir the tin thoroughly and test a small to ensure the primer adheres.

• Only apply when temperature is above 10°C.
• Stir the paint thoroughly.
• Apply the primer, for wood apply in the direction of the grain.
• Allow to dry for two hours.
• Apply a topcoat of preferred finish.

Note: Always follow the manufacturer instructions found on the tin.

Aftercare & Storage

Please note this product is only a primer and you will need to use a suitable topcoat

Repair

Repair any damage to the primer by sanding down the area and recoating with the pimer